3" QUICK FIST clamp - Item #50050

$12.95
• Holds objects from 2 3/4" to 3 1/4" (70mm to 83mm) in diameter. • Each clamp supports a safe working load of 50lbs (23 Kilos). • Mounts easily with one 1/4" (6mm) bolt or screw. • Mounting area: 4 1/2” x 1 1/4” (114mm x 32mm).
One Clamp Per Package
More Information
Package Contents One Clamp Per Package
Grip Size - (The diameter of the object you are mounting) 2 3/4" to 3 1/4" (70mm to 83mm)
Installation InstructionsView / Download (PDF)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.


Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.


Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.



Copyright © 2019