• Holds objects from 2 3/4" to 3 1/4" (70mm to 83mm) in diameter.
• Each clamp supports a safe working load of 50lbs (23 Kilos).
• Mounts easily with one 1/4" (6mm) bolt or screw.
• Mounting area: 4 1/2” x 1 1/4” (114mm x 32mm).
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.