LONG ARM QUICK FIST clamp - Item #40010

$19.95
• Holds objects from 1/2" to 4.5" (13mm to 114mm) in diameter. • Each clamp supports a safe working load of 50lbs (23k). Break strength is 120lbs (55k). • Mounts easily with two 1/4" (6mm) bolts or #14 wood or sheet metal screws, plus washers.
Two Clamps Per Package
More Information
Grip Size - (The diameter of the object you are mounting) 1/2" to 4.5" (13mm to 114mm)
Package Contents Two Clamps Per Package
Installation InstructionsView / Download (PDF)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.


Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.


Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.



Copyright © 2019