MINI QUICK FIST clamp - Item #30050

• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter. • Each clamp supports a safe working load of 25lbs (11 kilos). • 2 clamps support 50 lbs (23 kilos). • Mounts easily with one #10 bolt. • Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)
Two Clamps Per Package
More Information
Grip Size - (The diameter of the object you are mounting) 5/8" to 1 3/8” (16 to 32mm)
Package Contents Two Clamps Per Package
Installation InstructionsView / Download (PDF)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Copyright © 2019