Original QUICK FIST clamp - Item #10010

$10.95

• Holds objects 1" to 2.25" (25 to 57mm) in diameter. • Each clamp supports a safe working load of 25lbs (11 kilos). • 2 clamps support 50lbs (23 kilos). • Mounts easily with one #10 bolt or screw. • Mounting area: 2 3/4" x 7/8" (70x22mm).

Two Clamps Per Package
More Information
Package Contents Two Clamps Per Package
Grip Size - (The diameter of the object you are mounting) 1" to 2.25" (25 to 57mm)
Installation InstructionsView / Download (PDF)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.


Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.


Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.



Copyright © 2019