QUICK FIST XL clamp - Item #60060

$24.95
• Two 14’’ (356mm) separate straps hold round objects up to 15” (381mm) in diameter. • Holds equipment measuring up to 28” (711mm) in linear distance. • Each clamp supports a safe working load of 150lbs. (68 kilos) with a break-strength of 300lbs. (176 kilos). • Two clamps support 300lbs with a break-strength of 600lbs (272 kilos). • Each half of the clamp mounts with four #10 screws or bolts. • Mounting Area: 2” x 2” (51mm x 51mm)
Two Clamp Sets Per Package
More Information
Grip Size - (The diameter of the object you are mounting) ~3" to 15” (76 to 381mm)
Package Contents Two Clamp Sets Per Package
Installation InstructionsView / Download (PDF)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.


Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.


Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.



Copyright © 2019