QUICK FIST Rubber Tie Down Belt - Items #11050 & #11060


Significantly Stronger, Wider & More Weather Resistant than Bungee Cord!

38"L x 1.5"W X .25"D (965x38x6mm) Belt that Secures Equipment
• Not affected by hot or cold climates • UV resistant • Two belts can be "buttoned" together to almost double its length with the connector included in every package. • For use on work & emergency vehicles, off road & military trucks, ATVs and boats.

Securing equipment with two belts is always safer than one. 30lb propane tanks, 10 gallon water containers, Jerry cans and similar items always need two belts.

One Belt Per Package
More Information
Grip Size - (The diameter of the object you are mounting) ~10" to 38" (254 to 965mm)
Package Contents One Belt Per Package

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Copyright © 2019