SQUARE QUICK FIST clamp - Item #25010

• Holds fire extinguishers with diameters of 3" to 4.5" (76 to 114mm). • Holds 3" to 4" (76 to 102 mm) diameter square or round rescue struts. • Mounts with two .24" (6mm) bolts or screws (not provided). Mounting base is 5" x 1" (127 x 25mm) • Clam shell with header containing one clamp. • Square QUICKFIST clamp mounts fire extinguishers with diameters of 3" to 4.5" • Mounts round & square struts 3" to 4" in diameter. SWL of 50 lbs. each clamp.
One Clamp Per Package
More Information
Grip Size - (The diameter of the object you are mounting) 3" to 4.5" (76 to 114mm)
Package Contents One Clamp Per Package

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Copyright © 2019